Call for Participation

The VITA Standards Organization (VSO) plans to submit the following standard for ANSI Stabilized Maintenance:

1. ANSI/VITA 41.0-2006 (R2011) VXS VMEbus Switched Serial Standard
2. ANSI/VITA 41.1-2006 (R2011) VXS 4X InfiniBand (TM) Protocol Layer Standard
3. ANSI/VITA 41.2-2006 (R2011) VXS 4X Serial RapidIO Protocol Layer Standard

Also, VSO plans to submit the following standard for ANSI Reaffirmation:

1. ANSI/VITA 61.0-2011 XMC 2.0
2. ANSI/VITA 66.1-2012 Optical Interconnect on VPX - MT Variant

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standard in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close 14 days from now.

The VITA Standards Organization (VSO) plans to submit the following standard for ANSI Accreditation:

VITA 48.8, Mechanical Standard for Electronic VPX Plug-in 4 Modules Using Air Flow Through Cooling

This document describes an open standard for the design requirements for an air- flow-through cooled plug-in module having 3U and 6U form factors while retaining the VITA 46.0 connector layout. Unlike using cooling air impinged directly upon the components and circuit boards, this plug-in module uses a finned heat exchanger frame located within the central section of the assembly to top cool primary circuit board components as well as mezzanine board components. Both 3U and 6U standard form factors are offered using 3 defined pitch spacings, with options to have alternate air flow intake and exhaust paths. The plug-in modules of this standard exhibit a weight reduction and cost savings by eliminating both wedge retainer usage and module lever usage by way of using light weight jack screws for plug-in module insertion and extraction into a subrack chassis. The intention of this standard is to optimize SWAP-C (Size, Weight, Power, Cost).

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standard in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close 14 days from now.

The VITA Standards Organization (VSO) plans to submit the following standard for ANSI Stabilized Maintenance:

ANSI/VITA 20-2001 (R2011), Conduction Cooled PMC

This standard defines the methodology and implementation details to allow the creation of conduction cooled PMC modules to ensure electrical and physical compatibility with various host card modules onto which conduction cooled PMCs are mounted.

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standard in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Monday May 2, 2016.

The VITA Standards Organization (VSO) has voted to submit the following draft standard for ANSI accreditation:

VITA 66.4 (201x) (New Standard), Optical Interconnect On VPX – Half Width MT Variant

• This document describes an open standard to define a Half Width MT style contact variant within the VITA 66 family of blind mate Fiber Optic interconnects for use with VPX backplanes and plug-in modules.

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Monday Feb 22, 2016. 

The VITA Standards Organization (VSO) has voted to submit the following draft standard for ANSI accreditation:

• Revised ANSI/VITA 42 XMC Switched Mezzanine Card Auxiliary Standard
• Revised ANSI/VITA 51.2 Physics of Failure Reliability Predictions 
• Reaffirm ANSI/VIT 48.5 Mechanical Standard for Electronic Plug-in units Using Air Flow Through Cooling

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Tuesday Jan 26, 2015.
 

VITA 62.0-201x (Revision), Power Supply Standard

This proposed standard will provide guidelines to building a power supply module that can be used to power a VPX chassis. The module will fit within the standard envelope defined for VPX modules using the VITA 48 specifications.

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Tuesday Jan 19, 2015.

The VITA Standards Organization (VSO) has voted to submit the following draft standards for ANSI accreditation:

• ANSI/VITA 42.0-2008 (R2014) (Revision), XMC Switched Mezzanine Card Auxiliary Standard
• ANSI/VITA 51.2-2011 (Revision), Physics of Failure Reliability Predictions
• ANSI/VITA 53.0-2010 (Reaffirmation), Standard for Commercial Technology Market Surveillance
• ANSI/VITA 48.5-2010 (Reaffirmation), Mechanical Standard for Electronic Plug-in units Using Air Flow Through Cooling

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register.

Registration for the ballot will close Friday Oct 9, 2015.

The VITA Standards Organization (VSO) has voted to submit the following draft standards for ANSI accreditation:

• VITA 66.0-2011 (Revision), Optical Interconnect on VPX – Base Standard
  

This standard defines a family of blind mate Fiber Optic interconnects for use with VPX backplanes and plug-in modules.

• VITA 66.4 (201x) (New Standard), Optical Interconnect On VPX – Half Width MT Variant
  

This document describes an open standard to define a Half Width MT style contact variant within the VITA 66 family of blind mate Fiber Optic interconnects for use with VPX backplanes and plug-in modules.

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Wednesday Jun 17, 2015.

 

The VITA Standards Organization (VSO) has voted to reaffirm the following ANSI standard:

ANSI/VITA 53.0-2010, Standard for Commercial Technology Market Surveillance

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director, for details to register. Registration for the ballot will close Tuesday May 26, 2015.

 

The VITA Standards Organization (VSO) has voted to submit the following draft standards for ANSI accreditation:

• ANSI/VITA 49.0 (201x), VITA Radio Transport (VRT) Standard  (Revision)
• ANSI/VITA 49.1 (201x), VITA Radio Link Layer Standard
• ANSI/VITA 49a (201x), Spectrum Survey Interoperability Specification

As part of the VSO policy and procedures we invite members and non-members who are directly and materially affected by the standards in question to cast a ballot for this standard. If you wish to participate in the ballot please contact Jing Kwok, VITA Technical Director for registration details. Registration for the ballot will close Tuesday May 12, 2015.